OPERATION GUIDE
1. CHARGE
Fully charge the device before first use. Please use the provided USB-C cable to charge your device.
The display screen will show that the device is charging and always be on once fully charged.
2. LOAD
How to use the oven:
Remove the magnetic mouthpiece tip and choose which botanical substance is best for you. Due to the oven’s delicate technology, please be gentle when packing the oven and/or inserting the oven cup and/or during cleaning.
Botanical Flower:
Loosely pack the ground substance in the oven chamber. Do not pack the substance beyond the top of the oven chamber.
Botanical Concentrate:
Insert the concentrate/wax cup into the oven chamber. Use the dab/scraping tool to load the desired amount of substance into the cup.
3. POWER ON/OFF
Click the power button 3 times, the NOIR will be powered on and begin to heat up under the default settings or your last temperature setting.
Under “ON DEMAND” mode, the device will automatically become “STANDBY” mode if not being used within 30 seconds. Then it will automatically power off if not being used within the next 120 seconds.
Click the power button 3 times to turn it off, and the NOIR will vibrate to indicate shut down.
4. ENJOY NOIR
Two modes are available while heating, the OLED display temperature will go up, and the “coffee cup” indicator will flash as well.
SESSION Mode: The device vibration indicates readiness, and the timer countdown starts. Inhale through the mouthpiece, this device will automatically begin vaping.
ON DEMAND Mode: Keep pressing the “power button” to heat up, the device will vibrate when it’s reached the set temperature and is ready for inhaling. The device will vibrate 3 times and auto suspends heating after 30 seconds, please keep pressing the “power button” again to increase the use for an additional 30 seconds.
5. TEMPERATURE SETTINGS
Press or hold the “up button” to increase temperature or press or hold the “down button” to decrease temperature.
Click to change by degree, hold to change quickly.
6. TIMER SWITCHOVER
NOIR has 2 session timers, 4 minutes and 6 minutes.
To switch over between 4 minutes and 6 minutes, just hold the “power button” and the “up button” at the same time for 2 seconds.
7. FAHRENHEIT AND CELSIUS SWITCH OVER
To switch over to Fahrenheit, hold the “power button” and the “down button” at the same time for 2 seconds.
8. MODE SWITCH OVER
To switch over to “ON DEMAND” mode, click the “up button” and the “down button” simultaneously at once.
The device will automatically power off if not being used within 120 seconds. Click the “up button” and the “down button” simultaneously at once, then switch over to “SESSION” mode.
9. CLEANING & MAINTENANCE
To keep the NOIR working optimally and maintaining the purest taste, we recommend that all parts which come in contact with material or vapor be cleaned regularly.
All removable parts can be disassembled for optimal cleaning.
Mouthpiece & Filter
Gently pull the mouthpiece to remove it. It can be cleaned with soap and water.
For deep cleaning, immerse all pieces except the plastic mouthpiece in isopropyl alcohol for 10-20 minutes, rinse thoroughly with clean water, and dry before reassembling.
Metal Oven Cleaning
Use the brush to sweep inside, and a cotton swab dipped in isopropyl alcohol.
* Tip: Perform a burnoff cycle at max temp for 2 minutes after cleaning.
After using the NOIR or charging, please allow the device to cool down before storage. It should be stored in a clean, dry place protected against the effects of weather and out of the reach of children and pets. If you have any concerns or if there is any problem, please switch off the NOIR and/or remove it from the charger immediately. Do not try to remedy any defect yourself. Contact our customer service directly at support@kingpalm.com.
Note:
Do not touch the heating element immediately after use.
Do not clean the whole device with water or submerge.
Do not inject any liquid or oil into the metal oven.
Make sure to deactivate the device by locking it. Make sure it has not been used for at least 30 minutes and is completely cooled off.
Warning:
Hot components
Comments
0 comments
Article is closed for comments.